Phone
+49 2196 887669-0
Steel plate conveyors are designed for special applications and complete the ALFOTEC programme. The belts consist of several steel plates connected by hinges and are suitable for materials with extreme properties: e.g. high temperatures, heavy soiling, sharp-edged contours, contaminated with milling chips, moisture or emulsions. The belts are driven on both sides by single chains, sprockets and three-phase geared motor.
Suitable for:
The following guide values apply to standard conveyors, in internal ambient conditions and for defined applications and goods conveyed.
Length (per conveyor, fully assembled) | up to 6.000 mm |
Useful width | up to 2.000 mm |
Overall height (motor position below) | from 400 mm |
Overall height (motor position lateral) | from 100 mm |
Speed | up to 12 m/min |
Surface load, standard | up to 350 kg / m |
Drive (IE3/4) | Fabrikat SEW EuroDrive |
Optional reversible operation | via Omega Station |